Koeweidestraat 27 1785 Merchtem Tel.: +32 52 37 31 11 Fax: +32 52 37 39 33 info@sico-inks.com	WATERBASED INKS AQUASET AS Application: cardboard, heavy paper (at least 130 gr), wood Aspect: satin Drying: 10 min in open air, immediate dry in tunnel Dilution: water Cleaning: with water (with or without high pressure). So no reducers or thinners needed. Mesh: 77T-140T SUBLIMATION TRANSFER ASV Application: paper, transfers on polyester, nylon and acrylic for sports wear, carpets, etc. Existing pigments: yellow, red, magenta, violet, dark blue, light blue, turquoise, black (grey), dark black, yellow fluo, green fluo, magenta fluo. By mixing these pigments, almost all colours can be obtained. Colour preparation: sometimes this can provoke problems, but you can always consult our services. For polyester: all pigments are suitable. Varnish on a water basis ASV 150: - Dilute and clean with water - Mesh: 120T - 104T - Advantage: no desiccation, weak smell - Disadvantage: a more heavy paper is necessary (minimum 130 gr/m²) - Oven drying is necessary Resistance: - washing resistance: (50°) - light resistance: very good - friction resistance: very good Drying 5 min. in open air, immediate dry in tunnel Sublimation conditions: 210°C during 30 to 40 sec. SICOTEX SX Application most of the synthetic fabrics and a mixture of both, especially for light coloured fibres Drying: 150°C for 3 minutes When adding 3% hardener HSX, fixation is not necessary. Dilution: - water - SX 3000 Cleaning: We advice to clean with (warm) water and detergent immediate after impression, eventually on high pressure. Films: waterproof films are suitable. Covering capacity: 15 - 25m²/litre, depending on the used mesh (43T - 77T) Overprintability: wet in wet Resistance: excellent by good polymerisation This is a very ecological ink. . PIGMENT PASTES FOT WATERBASED INKS Application: for sicotex, aquaset and opatex All basic colours are available. OPATEX OT Application: super covering ink for printing on dark coloured fabrics, as well as natural as most of the synthetic fabrics. Aspect: satin Cleaning: we advise to clean with (warm) water and detergent immediately after the impression, eventually on high pressure. Drying and fixation: 150°C for 3 minutes - When adding 3% hardener fixation at high temperature is not necessary. Dilution: - water - OT 6000 Films: waterproof films are suited. Covering capacity: 15-25 m²/litre, depending on the used mesh (45T - 77T) Wash resistance: excellent by good polymerisation Transfer: suitable for cold transfer on K-Way, nylon and polyester Remarks: - adding 3% HOT causes a very good adherence on different materials - a very ecological ink - very opaque, even on dark coloured materials
Webki Designed & Powered by Proximedia

<a href="http://www.proximedia.com/local/sico/nl/index.html">Zeefdrukinkten Sico</a> <a href="http://www.proximedia.com/local/sico/nl/p1.htm">KLASSIEKE INKTEN</a> <a href="http://www.proximedia.com/local/sico/nl/p2.htm">INKTEN OP WATERBASIS</a> <a href="http://www.proximedia.com/local/sico/nl/p3.htm">UV INKTEN</a> <a href="http://www.proximedia.com/local/sico/nl/p4.htm">DIVERSEN</a> <a href="http://www.proximedia.com/local/sico/nl/p5.htm">SPECIALE TOEPASSINGEN</a> <a href="http://www.proximedia.com/local/sico/nl/infoNL.htm">Inlichtingen</a> <a href="http://www.proximedia.com/local/sico/en/index.html">Sico Screen Inks</a> <a href="http://www.proximedia.com/local/sico/en/p1.htm">SOLVENTBASED INKS</a> <a href="http://www.proximedia.com/local/sico/en/p2.htm">WATERBASED INKS</a> <a href="http://www.proximedia.com/local/sico/en/p3.htm">UV INKS</a> <a href="http://www.proximedia.com/local/sico/en/p4.htm">MISCELLANEOUS</a> <a href="http://www.proximedia.com/local/sico/en/p5.htm">SPECIAL APPLICATIONS</a> <a href="http://www.proximedia.com/local/sico/en/inlichtingen.htm">Information</a> Sico Screen inks